Plan of power house, fitting shop and stores, showing a ground plan and side elevation of the building, likely for Briton Ferry Ironworks

Archive Unit

For more information, email the repository
Advice on accessing these materials
Cite this description
Bookmark:http://archiveshub.jisc.ac.uk/data/gb216-d/dbfiw/d/dbfiw3/9

This material is held at
Reference
Dates of Creation
Language of Material
Physical Description

Archive Record|Table of contents

Briton Ferry Iron Works recordsD/D BFIW

Mechanical and technical plans. Original numbering used, based in part on item D/D BFIW 10/2DD BFIW/1/hub

Site plansDD BFIW/2/hub

Other plansDD BFIW/3/hub

Plan of the Tin house at Vernon Tin Works, including a floor plan and a front and side elevationD/D BFIW 3/1

Plan of foundation for 1 Patent Galloway Boiler 260 x 70, including cross sections and side elevations, presumably for Briton Ferry IronworksD/D BFIW 3/2

Plan of a tin house, including floor plan, cross section and side elevation, possibly at Vernon Tin Works,D/D BFIW 3/3

14 Accumulator, 140 stroke, designed by Tannett Walker & Company Limited of Leeds, presumably for Briton Ferry IronworksD/D BFIW 3/4

Plan of boiler for blast engines with the application of gas from the blast furnaces for generating steam for blast engines erected at Cwmavon Works, 21 May 1855, presumably for Briton Ferry IronworksD/D BFIW 3/5

Plan showing elevations and sections of Barrow blast furnace, presumably for Briton Ferry IronworksD/D BFIW 3/6

Sections showing position of plate for supporting brickwork at end of boilers, new blast furnace plan designed by Guest, Keen and Nettlefolds Limited, Dowlais Works, presumably for Briton Ferry IronworksD/D BFIW 3/7

Foundation plan, quarter crank blowing engine no. 301 showing front and rear views of the engine, as well as details, designed by Richardson Westgarth and Company, presumably for Briton Ferry IronworksD/D BFIW 3/8

Plan of power house, fitting shop and stores, showing a ground plan and side elevation of the building, likely for Briton Ferry IronworksD/D BFIW 3/9

Plan showing cast steel coupling for mill engine designed by The Whitford Steel Sheet & Galvanizing Company Limited, likely for Briton Ferry IronworksD/D BFIW 3/10

Plans showing frames and springs for a locomotive engine for the Duffryn and Graigola Coal Company, Neath Abbey IronworksD/D BFIW 3/11

Plans showing wheels and axles for a locomotive engine for the Duffryn and Graigola Coal Company, Neath Abbey IronworksD/D BFIW 3/12

Plan showing house for a 52 inch condensing blowing engine, possibly from the Neath Abbey Iron WorksD/D BFIW 3/13

Sectional elevation and plan of blast furnace, new plant designed by Guest, Keen and Nettlefolds Limited, Dowlais WorksD/D BFIW 3/14

Plan showing arrangement of pipes for numbers 342 and 343 engines, designed by Daniel Adamson and Company, DukinfieldD/D BFIW 3/15

Plan of foundations for engines number 342 and 343, designed by Daniel Adamson and Company, DukinfieldD/D BFIW 3/16

Plan showing sundry views of a vertical boilerD/D BFIW 3/17

Plan showing detail of 40 ton Siemens Furnace, Derwent WorksD/D BFIW 3/18

Plan showing cylinders and nozzles for a 36 inch diameter and 15 feet stroke beam engine for Mr Daniel Edwards and Company, Morriston, showing several cross sectionsD/D BFIW 3/19

Plan showing locomotive engine for the Duffryn and Graigola Coal Company, Neath Abbey Iron WorksD/D BFIW 3/20

Plan showing crank end of connecting rod for the bo in engine for the Briton Ferry Rolling MillD/D BFIW 3/21

Plan showing a 14 inch high pressure vertical engine for the Aberdare Iron Company, Neath Abbey Iron WorksD/D BFIW 3/22

Plan showing regenerator brick for Cowpers Hot Blast Stoves at full sizeD/D BFIW 3/23

Plan showing details of parts for use in the Villiers Boiler House, designed by John Lysaght Limited, Roofing Department Galvanized Iron Works, BristolD/D BFIW 3/24

Plan showing horizontal compound condensing rolling mill engines for tin plate mill, showing an elevation and a plan of the engine as well as some specifications, designed by Daniel Adamson and Company, DukinfieldD/D BFIW 3/25

Plan showing a chimney at Briton Ferry Iron Works, giving detailed dimensionsD/D BFIW 3/26

Plan showing arrangement of fire front showing firebrick lining blocks to protect front seam of flue, also firebrick blocks used in seating boiler, designed by Daniel Adamson and Company, DukinfieldD/D BFIW 3/27

Plan showing dimensions for a Spiegel FurnaceD/D BFIW 3/28

Plan showing dimensions for a bronze valve sealD/D BFIW 3/29

Plan showing indicator diagrams 32 & 65 x 72 mill engine, by The Whitford Steel Sheet & Galvanizing Company LimitedD/D BFIW 3/30

Plans showing comparative dimensions of various furnaces at other Iron WorksD/D BFIW 3/31

Plan showing dimensions of Blaenavon FurnaceD/D BFIW 3/32

Plan showing position of down shop leads, the Briton Ferry Works LimitedD/D BFIW 3/33

Plan showing erecting marks on cold blast and exhaust pipesD/D BFIW 3/34

Plan showing sectional elevation of propose blast furnaces at Briton Ferry, designed by E.W. Hampton, SwanseaD/D BFIW 3/35

Plan showing arrangement of koppers coke ovens and bye-product plantD/D BFIW 3/36

Plan showing our boiler in use, presumably belonging to Briton Ferry Iron Works or a related organisationD/D BFIW 3/37

Plan showing chimney 150ft by 6ft at The Whitford Steel Sheet and Galvanizing Company Ltd.D/D BFIW 3/38

Plan showing a chimneyD/D BFIW 3/39

Various untitled plans and rough technical drawings relating to the Briton Ferry Iron WorksD/D BFIW 3/40 a-d

Various untitled plans and rough technical drawings relating to the Briton Ferry Iron WorksD/D BFIW 3/41 a-b

Plan showing Briton Ferry and the line of a proposed new motorway, (presumably M4) by Sir Owen Williams and Partners practice.D/D BFIW 3/42

Housing plansDD BFIW/4/hub

Business and technical recordsDD BFIW/5/hub

Personal documents and itemsDD BFIW/6/hub

CorrespondenceDD BFIW/7/hub

Books and published itemsDD BFIW/8/hub

Press cuttingsDD BFIW/9/hub

Other recordsDD BFIW/10/hub

PhotographsDD BFIW/11/hub